Xerox WorkCentre C226 System Administration Manual Download Page 98 | Manualshive

Page: 98 / 216

Xerox WorkCentre C226 System Administration Manual Download Page 98

3-12

Xerox WorkCentre C226 System Administration Guide

PostScript Kit

10. When you are asked if you wish to install the display font, select an answer and

click the [Next] button.

11. Follow the on-screen instructions to install the printer driver.

If a warning message regarding the Windows logo test appears while the printer
driver files are being copied (the warning message may appear several times), be
sure to click the [Continue Anyway] button.

12. When the finish setup window appears, click the [OK] button.

13. When the finish installation window appears, click the [Close] button.

When the message "Now connect the interface cable to the PC. This will finalize
the driver's installation and settings." appears, click the [OK] button.

NOTE:

A message prompting you to restart your computer may appear after installation is
finished. If this message appears, click [Yes] to restart your computer.

14. Connect the machine to your computer an interface cable.

•

If you are using a USB cable, make sure the machine power is turned on and then
connect the cable.

•

If you are using a parallel cable, turn off both the machine power and the computer
power and then connect the cable. Turn the machine power on first and then turn
on your computer. The machine is found and a plug and play window appears.

15. Installation of the printer driver begins.

The printer name will appear in the "Found New Hardware Wizard". Select "Install
the software automatically (Recommended)" and click the [Next] button. Follow
the on-screen instructions to install the printer driver.

This completes the installation.

«
...
96
97
98
99
100
...
»

Summary of Contents for WorkCentre C226

























































































































































































































Reviews:

No comments