Xerox WorkCentre C226 System Administration Manual Download Page 91 | Manualshive

Page: 91 / 216

Xerox WorkCentre C226 System Administration Manual Download Page 91

Requirements for Windows

Xerox WorkCentre C226 System Administration Guide

3-5

Installing the printer driver (standard installation)

The procedure for a standard installation of the printer driver is explained below. This
procedure is normally used when the printer driver will be used with a network connec-
tion.

To use the machine as a network printer in Windows NT 4.0, "TCP/IP Protocol" and
"Microsoft TCP/IP Printing" must be installed on your computer. Make sure these are
installed. If either is not installed, install as explained in Windows NT 4.0 Help.

NOTE:

When installing the printer driver, if you wish to install a display font or specify the IP
address of the machine by direct entry, select [Custom installation] (page 3-7).

1.

Insert the WorkCentre C226 PostScript Drivers CD-ROM that accompanied the
machine into your CD-ROM drive.

2.

Click the [start] button, click [My Computer], and then double-click the CD-ROM
icon.

In Windows 95/98/Me/NT 4.0/2000, double-click [My Computer], and then double-
click the CD-ROM icon.

3.

Double-click the [SETUP] icon.

4.

The Licence Agreement window will appear. Make sure that you understand the
contents of the licence agreement, and then click the [Yes] button.

5.

After confirming the message in the "Welcome" window, click the [Next] button.

6.

Click the [Printer Driver] button.

To view detailed information on the software, click the [Display Readme] button.

7.

Click the [Next] button.

«
...
89
90
91
92
93
...
»

Summary of Contents for WorkCentre C226

























































































































































































































Reviews:

No comments