Xerox WorkCentre C226, System Administration Manual, Page: 194 / 216

6-48 Xerox WorkCentre C226 System Administration Guide
Fax Unit
5. Select the desired program and configure the setting.
Page 6-46 shows the programs that can be selected.
The settings for each of the programs are explained on the following pages.
6. Press the [CA] key to exit the program.
Supplementary explanation of key operation for key operator
programs
A When a key that appears in the form is touched, the setting screen
of that key will appear.
B Check mark boxes are touch keys that show the status of selections. A box with a
check mark means the function is "on" (enabled) and an unchecked box means
the function is "off" (disabled). The on/off status changes each time the box is
touched.
C If the settings continue on the following screen(s), touch the and keys to
move back and forth through the screens. To return to the category selection
screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the and keys.
15
(1 15)
Key Operator Programs
Fax Default Settings
1/3
Own Number And Name Set
Initial Resolution Setting
Must Input Next Address
Key At Broadcast Setting
Ok
Default Display Settings
The Number Of Direct Address
Keys Displayed Setting
6
A
B
C
D E
The following types of entry keys may
appear in the screens.
XXX