Xerox WorkCentre C226, System Administration Manual, Page: 56 / 216

2-6 Xerox WorkCentre C226 System Administration Guide
Key Operator Programs
4. Touch the [KEY OPERATOR CODE CHANGE] key .
If you wish to configure a different program, select the
program in this step.
A setting screen for the selected program will appear.
See the explanation of the program on page 2-10.
5.Use the numeric keys to enter the new 5-digit key
operator code.
Use a number for the key operator code that has not
been programmed as an account number for auditing
mode (a number that has been programmed as an
account number cannot be used). The entered number
will be the new key operator code. Be sure to remember
this number.
6. Touch the [OK] key. You will return to the screen of step 4.
This completes the procedure for changing the key oper-
ator code. If you wish to configure another program,
touch the key of the desired program in the screen of
step 4.
7. Press the [CA] key to exit the program.
You will exit the key operator programs and return to the
main screen.
N/W Sca
Setti
Printer
Settings
Key Operator
Code Change
tings
Produc
rint
00000
-----
OK