manualshive.com logo in svg

Xerox WorkCentre C226, System Administration Manual, Page: 31 / 216

Share
Download
Xerox WorkCentre C226 System Administration Manual Download Page 31

Installing the Printer Driver and Utilities (Software Installation)

Xerox WorkCentre C226 System Administration Guide 

1-7

Set the IP address of the machine

Before installing the printer driver, set the IP address of the machine using the appro-
priate key operator program. For this procedure, see Chapter 2, “Key Operator Pro-
grams”. The factory default setting for the IP address is "DHCP", which means that the 
IP address is set automatically.

If you are not using the machine in a DHCP environment, ask your network adminis-
trator for the IP address, Subnet mask, and Default gateway to be used for the 
machine, and then input this information into the key operator program.

NOTE:

If DHCP is used, the IP address assigned to the machine may be changed 
automatically on occasion. If this happens, printing will not be possible.

To use DHCP on this machine, please configure a DHCP reservation. Or, if you 
configure a fixed IP address setting, the problem will be resolved.

Installing the printer driver (standard installation)

The procedure for a standard installation of the printer driver is explained below. This 
procedure is normally used when the printer driver will be used with a network connec-
tion.

To use the machine as a network printer in Windows NT 4.0, "TCP/IP Protocol" must 
be installed on your computer. Make sure these are installed. If either is not installed, 
install as explained in Windows NT 4.0 Help.

NOTE:

When installing the printer driver, if you wish to install a display font or specify the IP 
address of the machine by direct entry, select [Custom installation] (page 1-10).

1.

Insert the WorkCentre C226 PCL Print Drivers and Printer/Network Setting 
Utilities CD-ROM that accompanied the machine into your CD-ROM drive.

2.

Click the [start] button, click [My Computer], and then double-click the CD-ROM 
icon. 

In Windows 95/98/Me/NT 4.0/2000, double-click [My Computer], and then double-
click the CD-ROM icon.

3.

Double-click the [SETUP] icon.

4.

The Licence Agreement window will appear. Make sure that you understand the 
contents of the licence agreement, and then click the [Yes] button.

5.

After confirming the message in the "Welcome" window, click the [Next] button.

Summary of Contents for WorkCentre C226

























































































































































































































Reviews:

No comments