Xerox WorkCentre C226, System Administration Manual, Page: 196 / 216

6-50 Xerox WorkCentre C226 System Administration Guide
Fax Unit
Default display settings
You can select the initial display that appears when you press the [IMAGE SEND] key
to change to fax mode or when you press the [CA] key in fax mode. Normally the initial
display is set to the condition settings screen.
• Condition settings screen
• Address directory (ABC)
• Address directory (Group)
When an address directory (ABC or Group) is selected, the selected index of that
address directory screen is set as the initial screen.
The number of direct address keys displayed setting
The number of one-touch keys displayed in each address directory screen can be
changed from 8 (the normal setting) to 6 or 12.
Touch 6, 8, or 12 to select the desired number.
NOTE: For the key name that appears in each one-touch key, a maximum of 18 characters
can appear when the number of one-touch keys displayed is set to 6 or 8. A maximum
of 10 characters can appear when the number of one-touch keys displayed is set to
12.
Must input next address key at broadcast setting
You can select whether the [NEXT ADDRESS] key must be touched before entering
the next destination when performing a broadcast transmission. Normally the machine
is set so that touching the [NEXT ADDRESS] key can be omitted except when the
numeric keys are used to enter one full fax number after another full fax number.
Example: Normal setting (factory setting)
If the box is checked, it will no longer be possible to omit the [NEXT ADDRESS] key as
shown in the above example. Even if the next destination to be entered is a one-touch
key, the [NEXT ADDRESS] key must be touched before the one-touch key can be
entered. If an operator attempts to enter the next destination without touching the
[NEXT ADDRESS] key, a double-beep alarm will sound and the entry will be rejected.
XXXX NEXT ADDRESS One-touch NEXT ADDRESS One-touch
Dial
Can be omitted Can be omitted
XXXX NEXT ADDRESS XXXX
Dial Dial
Cannot be omitted.