Xerox WorkCentre C226 System Administration Manual Download Page 45 | Manualshive

Page: 45 / 216

Xerox WorkCentre C226 System Administration Manual Download Page 45

Installing the Printer Driver and Utilities (Software Installation)

Xerox WorkCentre C226 System Administration Guide

1-21

13. Check the contents of the window and click the [Next] button.

Installation of the printer driver begins.

NOTE:

When you are using Windows 2000/XP/Server 2003

If a warning message regarding the Windows logo test or digital signature appears, be
sure to click the [Continue Anyway] or [Yes] button.

14. Select the printer driver being installed as the default printer and click the [Next]

button.

15. When the printer name window appears, click the [Next] button.

If you wish to change the printer name, enter the desired name.

16. When you are asked if you wish to install the display font, select an answer and

click the [Next] button.

17. Follow the on-screen instructions to install the printer driver.

18. When the finish setup window appears, click the [OK] button.

19. When the finish installation window appears, click the [Close] button.

When the message "Now connect the interface cable to the PC. This will finalize
the driver's installation and settings." appears, click the [OK] button.

NOTE:

A message prompting you to restart your computer may appear after installation is
finished. If this message appears, click [Yes] to restart your computer.

20. Turn off both the machine power and the computer power and then connect the

parallel cable (page 1-26).

After connecting the cable, turn the machine power on first and then turn on your
computer.

This completes the installation.

«
...
43
44
45
46
47
...
»

Summary of Contents for WorkCentre C226

























































































































































































































Reviews:

No comments