manualshive.com logo in svg

Xerox WorkCentre C226, System Administration Manual, Page: 38 / 216

Share
Download
Xerox WorkCentre C226 System Administration Manual Download Page 38

1-14

Xerox WorkCentre C226 System Administration Guide 

Printer Installation

Installation method 2

Use this procedure to install the software in the following environments:

The printer is connected by USB cable or parallel cable.

Windows version: Windows XP/Server 2003

NOTE:

To install this software, you must have administrator's rights.

Installing the software in Windows XP/Server 2003 (USB/parallel 
interface)

Install the software as follows.

Before starting the installation, make sure the USB or parallel interface cable is not 
connected to the machine.

1.

Insert the WorkCentre C226 PCL Print Drivers and Printer/Network Setting 
Utilities CD-ROM that accompanied the machine into your CD-ROM drive.

2.

Click the [start] button, select [My Computer], and then double-click the CD-ROM 
icon.

3.

Double-click the [SETUP] icon.

4.

The Licence Agreement window will appear. Make sure that you understand the 
contents of the licence agreement, and then click the [Yes] button.

5.

After confirming the message in the "Welcome" window, click the [Next] button.

6.

Click the [Printer Driver] button.

To view detailed information on the software, click the [Display Readme] button.

7.

Click the [Next] button.

Summary of Contents for WorkCentre C226

























































































































































































































Reviews:

No comments