2-22
Xerox WorkCentre C226 System Administration Guide
Key Operator Programs
•
Prohibit key repeat
The touch panel contains keys such as the zoom keys (for setting the ratio) that
can be touched continuously to make a value change until it reaches a desired
value.
This feature whereby a value changes continuously while a key is touched is
called key repeat.
Key repeat is normally enabled. If you wish to prohibit key repeat, select the
"DISABLE AUTO KEY REPEAT" checkbox.
Device control
Use these programs when a peripheral device on the machine has failed or when you
wish to temporarily disable a device. The programs can also be used to change the
function setting of a device as required by your conditions of use.
"Device control" consists of the following programs:
•
Original size detector setting
•
Disabling of DADF
•
Disabling of duplex
•
Disabling of inverter
•
Disabling of stapler
•
Disabling of optional paper drawer
•
Disabling of high capacity feeder
•
Disabling of shifter
•
Disabling of finisher
•
Saddle stitch position adjust
•
Stream feeding mode
•
Auto paper selection setting
•
Registration adjustment
•
Return from copy mode timing
Summary of Contents for WorkCentre C226
