Xerox WorkCentre C226, System Administration Manual, Page: 71 / 216

General Programs
Xerox WorkCentre C226 System Administration Guide 2-21
Auto clear setting
After a programmed length has elapsed without any operation after a copy job is com-
plete or while detailed status information is being displayed, the auto clear function will
return the screen to the copy main screen or the job status screen. The auto clear time
can be set in 10 second increments up to 240 seconds. The auto clear function can be
disabled for copier functions.
Display language setting
This program is used to select the display language.
Message time setting
This program is used to set the length of time that messages appear in the display
(this applies to messages that appear for a certain length of time and then automati-
cally disappear.)
The time can be set to as long as 12 seconds in increments of one second.
Key operation setting
These programs are used to set the length of time a key in the touch panel must be
touched before the key input is registered, and to prevent repeated key input when a
key is touched continuously.
• Time until key input is registered
The time can be set from 0 seconds to 2 seconds in increments of 0.5 seconds.
Normally the time is set to 0 seconds so that key input is immediately registered
when a key is touched. By lengthening the time setting, key input can be
prevented when a key is touched accidentally. Keep in mind, however, that when a
longer setting is selected more care is required when touching keys to ensure that
key input is registered.