Xerox WorkCentre C226, System Administration Manual, Page: 40 / 216

1-16 Xerox WorkCentre C226 System Administration Guide
Printer Installation
14. Connect the machine to your computer an interface cable (page 1-26).
• If you are using a USB cable, make sure the machine power is turned on and then
connect the cable.
• If you are using a parallel cable, turn off both the machine power and the computer
power and then connect the cable. Turn the machine power on first and then turn
on your computer.
The machine is found and a plug and play window appears.
15. Installation of the printer driver begins.
The printer name will appear in the "Found New Hardware Wizard". Select "Install
the software automatically (Recommended)" and click the [Next] button. Follow
the on-screen instructions to install the printer driver.
This completes the installation.
Installation method 3
Use this procedure to install the software in the following environments:
• The printer is connected by USB cable.
• Windows version: Windows 98/Me/2000*
1
NOTE: *1 To install the software using the installer, you must have administrator's rights.
Installing the software in Windows 98/Me or Windows 2000 (USB/
interface)
Install the software as follows.
Before starting the installation, make sure the USB interface cable is not connected to
the machine.
The procedure for installing the printer driver is explained here using Windows Me as
an example.
1. Insert the WorkCentre C226 PCL Print Drivers and Printer/Network Setting
Utilities CD-ROM that accompanied the machine into your CD-ROM drive.
2. Double-click [My Computer], and then double-click the CD-ROM icon.
3. Double-click the [SETUP] icon.
4. The Licence Agreement window will appear. Make sure that you understand the
contents of the licence agreement, and then click the [Yes] button.