Xerox WorkCentre C226, System Administration Manual, Page: 11 / 216

Xerox WorkCentre C226 System Administration Guide xi
WARNING - Electrical Safety Information
• Use only power cord supplied with this equipment.
• Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If you do
not know whether or not an outlet is grounded, consult a qualified electrician.
• This equipment is to be operated from the type of electrical supply indicated on the product data plate
label. If this machine needs to be moved to a different location, contact a Xerox service representative
or your authorized local representative or service support organization.
• Improper connection of the equipment-grounding conductor can result in electrical shock.
• Do not place this equipment where people might step on or trip on the power cord.
• Do not place objects on the power cord.
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings.
• Never push objects of any kind into slots or openings on this equipment
• If any of the following conditions occur, switch off the power to the machine immediately and discon-
nect the power cord from the electrical outlet. Call an authorized local service representative to correct
the problem.
- The equipment emits unusual noise or odors.
- The power cord is damaged or frayed.
- A wall panel circuit breaker, fuse, or other safety device has been tripped.
- Liquid is spilled into the copier/printer.
- The equipment is exposed to water.
- Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a
plug-in device. To remove all electrical power from the equipment, disconnect the power cable from the
electrical outlet.