Xerox WorkCentre C226, System Administration Manual, Page: 114 / 216

3-28 Xerox WorkCentre C226 System Administration Guide
PostScript Kit
Configuring the print settings
Paper settings
Before printing, configure the paper settings in the printer driver.
The File menu of the software application is used to open the settings. The settings
and selections vary depending on the OS version and software application.
1. Select [Page Setup] from the [File] menu of the application.
The following window will appear. (The window varies depending on the operating
system version, printer driver version, and software application.)
2. Adjust each setting.
Paper size, reduction/enlargement, and orientation can be configured.
3. Click the [OK] button.
Print condition settings
1. Select [Print] from the [File] menu of the application.
The following window will appear. (The window varies depending on the operating
system version, printer driver version, and software application.)
2. Adjust the settings.
Click next to [Copies & Pages] ([General] in Mac OS 8.6 to
9.2.2) and select the settings that you wish to configure from
the pull-down menu. The corresponding setting screen will
appear.
NOTES: • The items that appear in this menu will vary depending on the operating system
version and software application.
• To print when auditing mode is enabled, enter your 5-digit account number in
[Account Number] in the [Job Control] menu.
When auditing mode is enabled, a print job may not be printed if an account number is
not entered or an incorrect account number is entered. This depends on the key
operator program settings.
3. Click the [Print] button.