Key Operator Programs
Xerox WorkCentre C226 System Administration Guide
6-55
Distinctive ring detection
This program can only be activated in Australia, and New Zealand.
If multiple telephone numbers have been assigned to your telephone line, the number
called can be identified by its ringing pattern. By using one number for voice calls and
another number for faxes, you can tell which type of call you are receiving by the ring-
ing pattern. You can set your machine to automatically receive faxes when your fax
number is called by setting the pattern that corresponds to your fax number. Normally
OFF is selected.
Disabling fax number direct entry
When the fax function is enabled, this program is used to prohibit dialing of a destina-
tion fax number by direct entry with the numeric keys. To prohibit dialing by direct entry
with the numeric keys, touch the checkbox to select it. When this is done, faxes can
only be sent to destinations that have been stored, and thus this program can be used
to restrict fax destinations and prevent accidental transmission to an incorrect number.
The following operations are also prohibited:
•
Storing, amending or deleting one-touch dial numbers
•
Storing, amending or deleting a group
Fax send settings
The fax send settings can be used to enable or disable fax transmission functions as
needed for your workplace.
The "Fax send settings" are as follows:
•
Auto reduction sending setting
•
Rotation sending setting
•
Printing page number at receiver
•
Call timer at memory sending
•
Date/own number print position setting
•
Quick on line sending
•
Recall in case of line busy
•
Recall in case of communication error
Auto reduction sending setting
This setting lets you select whether to have a transmitted document reduced to match
the size of the other machine's printing paper. Auto reduction is normally turned on. If
the setting is turned off, documents are sent in their original size. Because the size is
not adjusted to match the size of the printing paper, part of the received document may
be cut off.
Summary of Contents for WorkCentre C226
