2-12
Xerox WorkCentre C226 System Administration Guide
Key Operator Programs
•
If you wish to disable auditing mode for all functions, touch the [DISABLE] key.
The checkmarks will be removed from the checkboxes on the right and the check-
boxes will be greyed out.
NOTE:
To enable Auditing mode, program an account number as explained in “Account
number control” on page 2-17.
The following functions cannot be used unless auditing mode is enabled and an
account number is programmed.
•
Total pages per account
•
Resetting account
•
Account limit setting
When using the copy function, fax function, or network scanner function, the original
cannot be scanned unless an account number is entered.
NOTE:
Display when [COLOUR & B/W] is selected
In the screens shown from here through to page 7 that are used in the explanations of
the programs for resetting account and total pages per account, the [COLOUR & B/W]
setting in [AUDITING MODE (shown left)] is selected. The account numbers appear in
ascending order, with one account number (showing the total pages and limit of the
account) appearing per screen. When [COLOUR ONLY] is selected, two account
numbers appear per screen.)
When the
key or
key is displayed, you can touch either key to display the
following account groups.
Summary of Contents for WorkCentre C226
