Xerox WorkCentre C226, System Administration Manual, Page: 73 / 216

General Programs
Xerox WorkCentre C226 System Administration Guide 2-23
Original size detector setting
This program is used to select the standard original sizes that can be detected by the
original size detection function. Select one of the four groups indicated below. The fac-
tory default setting is "AB-1 (INCH-1)". Original size detection by the document glass
can also be disabled (CANCEL DETECTION AT DOCUMENT GLASS).
* When the DADF is used, these sizes are only supported for one-sided originals.
If "CANCEL DETECTION AT DOCUMENT GLASS" is set, originals will be regarded
as EXTRA for all copier functions and no original size will be displayed.
Disabling of DADF
This program is used to prevent use of the DADF when it malfunctions. In this case,
scanning can still be performed using the document glass.
Group
Detectable original sizes
DADF tray (for reversing single pass feed-
ing) or document glass
1
INCH - 1
11" x 17", 8-1/2" x 14", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2"*
2
INCH - 2
11" x 17", 8-1/2" x 13", 8-1/2" x 11",
8-1/2" x 11"R, 5-1/2" x 8-1/2"*
3 AB - 1 A3, A4, A4R, A5, B4, B5, B5R
4 AB - 2 A3, A4, A4R, A5, B5, B5R, 8-1/2" x 13"