Xerox WorkCentre C226, System Administration Manual, Page: 143 / 216

Protecting Information Programmed in the Web Page ("Passwords")
Xerox WorkCentre C226 System Administration Guide 5-19
Condition Setting Screen of
Scanner Mode
The condition setting screen of scanner mode is displayed by pressing the [SCAN/
FAX] key while the print mode, copy mode, or job status screen appears in the touch
panel*1. In the explanations that follow, it is assumed that the initial screen that
appears after pressing the [SCAN/FAX] key is the condition setting screen (shown
below). If you have set the display to show the address directory (page 5-21) when the
[SCAN/FAX] key is pressed, touch the [CONDITION SETTINGS] key in the address
directory to display the condition setting screen.
The key operator program "Default display settings" can be used to set the display to
show either the condition setting screen (shown below) or the Address directory
screen (page 5-21) when the [SCAN/FAX] key is pressed.
*1 When the optional facsimile expansion kit is installed, you will return to the condition
setting screen of fax mode or scan/fax mode, depending on which mode was last
selected. If the condition setting screen of fax mode appears, touch the key to switch
to the base screen of scan/fax mode.
NOTE: For information on the parts of the unit and the operation panel that are used for
network scanning, refer to the “General Information” section of the WorkCentre C226
User Guide. For parts that are used for both network scanning and printing, refer to the
“Printer Operation” section of the WorkCentre C226 User Guide.