Using the Key Operator Programs
Xerox WorkCentre C226 System Administration Guide
2-5
Using the Key Operator Programs
The procedure for configuring the key operator programs is explained below using the
"Key operator code change" program as an example. Follow the same steps to config-
ure the programs that are explained beginning on page 6.
1.
Press the [CUSTOM SETTINGS] key.
2.
Touch the [KEY OPERATOR PROGRAMS] key.
3.
Use the numeric keys to enter the five-digit key operator code.
Each time a number is entered, the dashes (-) in the dis-
play will change to asterisks (). The factory default set-
ting for the key operator code number is 00000.
/
Key Operator Programs
Address
Control
Receive Mode
Key Operator Code
Summary of Contents for WorkCentre C226
