Xerox WorkCentre C226, System Administration Manual, Page: 173 / 216

Storing a Group Index
Xerox WorkCentre C226 System Administration Guide 6-27
Storing a Group Index
Auto dial keys (one-touch keys and group keys) are normally stored in the ABC index.
To make auto dial keys more convenient to use, you can store a group of auto dial
keys in a group index and assign a name to that index. When you switch to the group
indexes, [USER 1], [USER 2], [USER 3], [USER 4], [USER 5], and [USER 6] appear.
You can assign any name up to 6 characters long to each of the USER indexes.
The procedure for storing auto dial numbers in a group index is explained in step 6 on
page 6-12, and the procedure for switching between the ABC index and the group
indexes is explained on page 6-7.
1. Press the [CUSTOM SETTINGS] key, and then touch the [ADDRESS CONTROL]
key (refer to steps 1 and 2 on page 6-9).
2. Touch the [CUSTOM INDEX] key.
3. Touch an index key ([USER 1] to [USER 6]).
You can enter a name for the selected index.
When touched, the letter entry screen appears.
Direct Address / Program
Custom Index
F-Code Memory Box
Custom Settings
Custom Index
Select The Key To Be Custom Named.
Ok
User 1 User 2 User 3 User 4 User 5 User 6