Xerox WorkCentre C226, System Administration Manual, Page: 148 / 216

6-2 Xerox WorkCentre C226 System Administration Guide
Fax Unit
Numeric keys Use to enter fax numbers, sub-addresses, passcodes, and numerical settings.
On the model for Singapore, alphabets are described on each numeric key.
[C] Clear Use to clear a mistake when entering fax numbers, sub-addresses, passcodes, and
numerical settings. One digit is cleared each time you press the key.
When an original is being scanned, this key can also be used to cancel scanning.
[COLOR COPY
START]
Not used when using the machine as a fax machine. (For information on this key, see
“General Information” in the WorkCentre C226 User Guide.)
[IMAGE SEND] Press to switch to fax mode. The initial screen of fax mode will appear.
When the network scanner option is installed, touch this key to return to the initial
screen of fax mode or scanner mode, whichever mode was selected last. (Pressing
the [IMAGE SEND] key in a copy screen or printer screen returns you to the initial
screen of fax mode.) To switch to the initial screen of fax mode from the initial screen
of scanner mode, touch the [SCANNER/FAX] key (see page 6-5).
[ ] This is used to produce tone signals when you are on a pulse dial line.
[BLACK COPY
START]
Press to begin scanning an original for fax transmission.
[CA] Clear All Use to cancel a transmission or programming operation. When this key is pressed, the
operation is cancelled and you return to the initial screen described on the page 6-3.
This key is also used to cancel a resolution, paper size, or special function setting that
was selected when sending a fax.
NOTE: For the names and functions of the parts of the machine, see the “General
Information” section in the WorkCentre C226 User Guide.
3
4
5
6
7
8
9