Wexxar WF30T, Operation And Service Manual

Page: 19 / 190

WF30T Case Former Installation
2-6
2.3 Removal from Crate
Before transporting the machine to its final
destination, check for sufficient floor and elevator
loading capacity. Then move the machine in an
upright position, in its original packaging, to its final
destination. This machine is packaged on a pallet,
and is suitable for handling with a forklift or lifting
belts with spreader bars.
Pay strict attention to the center of gravity. The
machine must be moved in an upright position. Do
not tilt machines more than +/- 10° during handling.
Do not stack any other packages on top of the
machine.
When the machine is in its final destination, inspect the machine thoroughly for shipping damage,
and ensure that all mechanisms move freely. Report any shipping damage immediately to your
Carrier.
Check spare parts kits, change parts, and any other loose items against the packing slip, and
report any errors or omissions to your WEXXAR agent for corrective action.
The crate should be dismantled and all packing materials and shipping ties should be removed.
Do not disassemble the unit.
Removal of the machine from the shipping base must be done carefully. The lifting equipment
that is used must be sufficiently strong to support the weight of the machine (
≈ 1,300 lbs./590 kg).
2.4 Mechanical Assembly
The Model WF30T Case Former is shipped in a fully assembled ‘ready-to-run’ condition.
CAUTION!
Be careful to avoid damaging the lower mechanisms in the
central part of the machine, which are not capable of
supporting the weight of the machine.