Wexxar WF30T, Operation And Service Manual

Page: 171 / 190

B E L 2 9 0 F
U L L Y
A
U T O M A T I C
C
A S E
T
A P E
S
E A L E R
21
65-35-1 06/17/09
17) ‘TOP/BOTTOM HEAD MANAGE’ Toggle
Switches
The ‘TOP/BOTTOM HEAD MANAGE’ toggle switches
control the status of the machine’s Tape Management System,
activating or deactivating sensors PHS-03, PRS-04, PRS-05,
PHS-06, PRS-07 and PRS-08.
18) ‘DRY CYCLE’ Toggle Switch
For the purposes of troubleshooting, machine operators may
choose to operate the machine without any cases loaded. This
function is called
‘DRY CYCLE’ . Touching the ‘DRY
CYCLE ON/OFF’ toggle switch in the left center of the
‘Setup’ screen turns the DRY CYCLE feature ON . The button
will turn green read DRY CYCLE ON when the machine is
operating in DRY CYCLE mode. When the machine has been
put into DRY CYCLE operation, an indicator also appears at
the bottom of the screen displaying the text ‘DRY CYCLE
ACTIVE’ . To exit the DRY CYCLE operation, press the
‘DRY CYCLE ON/OFF’ button. The button will now read
‘DRY CYCLE OFF’ .
When the machine is in DRY CYCLE operation, a small
indicator appears at the bottom of the screen displaying the text
‘DRY CYCLE ACTIVE’. To exit DRY CYCLE operation,
press the ‘DRY CYCLE ON’ button so that the button displays
the text ‘DRY CYCLE OFF’ .
19) ‘MAIN CONTROL’ Button
This button is located to the bottom left of the touchscreen on
the
‘Setup’ screen. Pressing the ‘MAIN CONTROL’ button
will take the user to the ‘Main Control’ screen.
20) ‘PARAMETERS’ Button
To adjust the machine parameters, touch the ‘PARAMETERS’
button in the lower right-hand corner of the ‘Setup’ screen.
Touching the ‘PARAMETERS’ button prompts the operator
for a password. Touch the blank field in the ‘Password’ screen
to bring up an ‘Alphanumeric Keypad’ window. Type the
required password. To enter the password into the ‘Password’
screen, touch the ‘ ENTER’ key. If you enter an invalid
password, an error message will display.
‘Tape Management’ Toggle
Switches
‘DRY CYCLE’ Toggle
Switch
‘DRY CYCLE
ACTIVE’ Indicator
‘MAIN CONTROL’
Button
‘PARAMETERS’
Button