Wexxar WF30T, Operation And Service Manual

Page: 92 / 190

WF30T Case Former Machine Maintenance
- 9-79 -
9 MACHINE MAINTENANCE
9.1 Safety
Equipment Safety
The WF30T has safety features to prevent you from injury while maintenance is in progress.
Sliding and bi-folding guard doors, equipped with interlock switches, are in place to prevent you
from entering the work cell while the case forming is in progress; the machine will not run if these
doors are open. The access door of the electrical enclosure also has to be closed for the
machine to operate.
The perimeter guarding system surrounds the area known as the
restrictive envelope
and covers
the entire range of possible machine motion. For your safety, you should never try to bypass the
perimeter guarding system or enter the restrictive envelope while the machine is in operation.
An
‘EMERGENCY STOP’
button is provided to immediately halt all machine operation by cutting
off air supply and electrical power. This button should be pushed
IN
to stop the machine in case
of an emergency.
Precautions
•
Do not use flammable or toxic fluids such as gasoline, benzene, or ether to clean the
equipment.
•
Do not use liquids other than those listed when performing maintenance on the machine.
•
Use the appropriate lubricants when performing lubrication on the machine.
•
Always follow the specified procedure when performing maintenance.
•
Do not bypass the safety features when performing maintenance.
Applicable Laws
•
Before adjusting, maintaining, or cleaning this machine, disconnect the power and lock
out according to local regulations.