Wexxar WF30T, Operation And Service Manual

Page: 167 / 190

B E L 2 9 0 F
U L L Y
A
U T O M A T I C
C
A S E
T
A P E
S
E A L E R
17
65-35-1 06/17/09
6) ‘START’ Button
The ‘START’ button starts the cycle of the machine. Once pressed, the
‘START’ button will be replaced with a ‘STOP’ button.
NOTE: When the ‘START’ button is pushed, the ‘SETUP’ button
disappears until the ‘STOP’ button is pushed and the machine stops its cycle.
7) ‘STOP’ Button
The ‘STOP’ button stops the automatic machine cycle.
8) ‘TOTAL NUMBER OF CASES’ Button and Display
The ‘TOTAL NUMBER OF CASES’ display indicates the total
number of cases sealed. This counter can be reset to 0. To reset this
value, press the touch-sensitive area with the blue numerals. When
this button is touched, a confirmation message will appear. To reset
the case counter to 0, touch
‘YES’ . Otherwise, touch ‘NO’ .
9) ‘ACTUAL CPM’ Display
The ‘ACTUAL CPM’ display shows the present CPM rate. Note that
the number is not touch-sensitive, and can only be changed by
pressing the
‘SELECTED CPM’ button.
‘START’ Button
‘STOP’ Button
‘TOTAL NUMBER OF
CASES’ Button and Display
‘ACTUAL CPM’ Button