Wexxar WF30T, Operation And Service Manual

Page: 165 / 190

B E L 2 9 0 F
U L L Y
A
U T O M A T I C
C
A S E
T
A P E
S
E A L E R
15
65-35-1 06/17/09
C
ONTROLS
D
ESCRIPTION
1) ‘MAIN DISCONNECT’ Switch
The ‘MAIN DISCONNECT’ switch turns the main electrical power to the
machine ON or OFF ; it can be locked in the OFF position for safety during
maintenance operations.
2) ‘RESET’ Button
The blue ‘RESET’ button returns the machine to a state in which it is ready to
resume operation after an EMERGENCY STOP or other machine fault.
3) ‘EMERGENCY STOP’ Button
Touching the ‘EMERGENCY STOP’ button immediately cuts off electrical and
air supply to the machine, and halts the conveyor belts regardless of whether a
case is positioned in the forming process when the button is pushed
IN . Note that
the kicker retracts to its HOME position if it is not already there.
Power is cut from the main air solenoid valve and all mechanisms. Restarting the
machine after an
EMERGENCY STOP is more complex. Most likely, the case
that was being formed will be wasted.
After consulting Section 6.4, the ‘EMERGENCY STOP’ button should be
released (raised) and the ‘RESET’ button pushed for the machine to operate
again.
‘Service’ Screen
‘MAIN DISCONNECT’
Switch
‘RESET’ Button
‘EMERGENCY
STOP’ Button