Wexxar WF30T, Operation And Service Manual

Page: 52 / 190

WF30T Case Former Controls
5-39
The
‘PLC Outputs’
screen displays 12 buttons.
Each of these output buttons control a PLC output
directly. To test these functions, stop the machine,
and remove any unformed cases from the
magazine. Then touch each button. When a
button is touched, it will illuminate and that machine
component will function. If it does not function,
inspect and repair the component. Touch the
‘PREVIOUS’
button in the bottom right-hand corner
of the
‘PLC Outputs’
screen to return to the
‘Setup’
screen. Touch the
‘MAIN CONTROL’
button in the bottom left-hand corner of the screen
to bring up the
‘Main Control’
screen.
33) ‘SETUP GUIDE’ Button
On the upper right-hand side of the
‘Settings’
screen is the
‘SETUP GUIDE’
button.
34) ‘SETUP GUIDE/HELP’ Screen
The
‘SETUP GUIDE/HELP’
Screen features nine buttons which
access illustrated instructions for eight different aspects of the
machine setup. They include instructions for the various case
size adjustments.
Figure 5-43: 'SETUP GUIDE/HELP’ Screen
NOTE:
The case size adjustments must be made in the correct sequence or damage to the
machine may result.
Figure 5-41: Illuminated ‘PLC
OUTPUT STATUS’ Indicator
Figure 5-42: 'SETUP
GUIDE’ Button