Wexxar WF30T, Operation And Service Manual

Page: 14 / 190

WF30T Case Former Safety
1-1
1 SAFETY
MUST BE READ PRIOR TO OPERATING
The WF30T has safety features to prevent you from injury while the machine is operating. Sliding
and bi-folding guard doors equipped with interlock switches prevent you from entering the work
cell while the case formation is in progress; the machine will not run if these doors are open. The
electrical enclosure access door must also be closed in order for the machine to operate.
The perimeter guarding system surrounds the area known as the
restrictive envelope
and covers
the entire range of possible machine motion. For your safety, you should never try to bypass the
perimeter guarding system or enter the restrictive envelope while the machine is in operation.
An
‘EMERGENCY STOP’
button immediately halts all machine operations by cutting off air
supply and electrical power. This button should be pushed
IN
to stop the machine in case of an
emergency.
WARNING!
The instructions in this manual are not intended to cover
all of the details or variations in equipment, or to provide
for every possible contingency to be met in connection
with installation, operation, or maintenance. Should
further information be desired, or should particular
problems arise which are not covered sufficiently for the
purchaser’s purposes, the matter should be referred
directly to WEXXAR.
WARNING!
Any electrical or mechanical modifications to this
equipment without the prior written consent of WEXXAR
may void your warranty. Unauthorized modifications can
also result in personal injury, death, or destruction of the
equipment.