CHAPTER 4 - KEYPAD (HMI) OPERATION
60
Operation of the Man Machine Interface (MMI) keys:
Starts (Enable) the motor (start).
Stops (Disables) the motor (stop).
Also resets the Soft-Starter after a fault has occurred.
Toggles the LED display between the parameter number and its value
(position/content).
Increases the number of the parameter or the value of the parameter.
Decreases the number of the parameter or the value of the parameter.
Reverses the direction of motor rotation between Forward/Reverse
Toggles between this LOCAL or REMOTE modes of operation.
Functions of the LCD Display:
The LCD Display shows the parameter number and its value
simultaneously, without the need of pressing the
key.
It also
provides a brief description of each parameter and also the units
(A, Hz, V, s, %) when necessary. It also provides a brief description of
the fault code and inverter status.
Local and Remote Led Functions:
Soft-Starter in Local Mode:
Green Led on and Red Led Off.
Soft-Starter in Remote Mode:
Green Led Off and Red Led on.
Direction of Rotation (FWD/REV) LED Functions:
Not implemented in this Software Version
Speed
ON
OFF
FLASHING
Forward
Forward
Reverse
Figure 4.2
- Direction of Rotation (FWD / REV) LED´s
0
FWD / REV Command (key)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
