CHAPTER 2 - GENERAL INFORMATION
25
2.5 RECEIVING AND
STORAGE
The SSW-06 is supplied in packaging according to the model:
-Models 85A to 205A in a cardboard box;
-Models 255A to 365A in a cardboard box over a wooden box;
-Models 412A to 1400A in a wooden box.
The outside of the packing container has a nameplate that is identical
to that on the Soft-Starter SSW-06. Please check if the nameplate data
matches the ordered data.
The models up to 205A must be placed and opened on a table with the
help of two or more people, open the box, remove the foam protection
and remove Soft-Starter SSW-06.
The models up to 205A must be placed and opened on a table with the
help of two or more persons.
Open the box, remove the foam protection and remove Soft-Starter
SSW-06 with the help of two or more persons.
Models greater than 255A must be opened on the floor. Open the box
and, remove the bolts that fasten the Soft-Starter SSW-06 on the pallet.
The Soft-Starter SSW-06 must be handled with a hoist.
Check if:
The Soft-Starter SSW-06 nameplate data matches the purchase
order;
The equipment has not been damaged during transportation. If any
problem is detected, contact the carrier immediately.
If the Soft-Starter SSW-06 is not to be installed immediately, store it
within its original cardboard box in a clean and dry room (Storage
temperatures between - 10°C (14ºF) and 65°C (149ºF)).
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
