157
Parameter
■ 7200
Note
This function is only available for system scheme 1 and 2.
When selecting system scheme 3 to 10,
the buffer cylinder will be defined auto-
matically as a system component.
In system scheme 2, if a heating water
buffer cylinder is part of the system, that
must be selected by opting for "
Yes
".
Access
■ "
Device settings
"
■ "
Programming
"
■
y
to "
Buffer cylinder
"
■ "
Buffer cylinder
"
■
"YES"
or
"NO"
Standard setting
No
Setting range
Yes/No
Buffer cylinder switching times
Parameter
■ 7201
Operating instructions
Fixed temperature
Parameter
■ 7202
Note
■ This function is only available in case
of system scheme 1 and 2, if the
option "Yes" was selected under "Buf-
fer cylinder".
■ The temperature cannot be set higher
than that selected under "Max.
temp.".
Setting of the temperature to which the
heating water buffer cylinder is heated, if
it is to be heated up and if the "
Fixed
value
" program was selected under
"
Buffer cylinder prog.
" (see operating
instructions).
Control settings, heating water buffer cylinder
Buffer cylinder
5368 522 UAE
Service
Summary of Contents for Vitocal 300-G BW
Page 57: ...57 6 1 2 4 3 5 A 5x Installation sequence Opening the heat pump 5368 522 UAE Installation...
Page 213: ...213 5368 522 UAE...
Page 214: ...214 5368 522 UAE...
Page 215: ...215 5368 522 UAE...
