background image

Model Numbers

REM-150T-SDR-O / REM-220T-SDR-O

CONSUMER: READ AND SAVE THESE INSTRUCTIONS

GENERAL HAZARD WARNING: READ AND UNDERSTAND 

ALL OF THE INSTRUCTIONS IN THIS MANUAL BEFORE 

ASSEMBLING, STARTING, OR SERVICING THE HEATER. 

Be sure to comply with the instructions and warnings provided with this heater. Failure to 

comply can result in fire or explosion that can cause property loss, bodily injury, or loss 

of life. Only persons who can follow and understand these instructions should operate or 

service this heater. If you need heater info; such as an operating manual, labels, etcetera, 

contact Pinnacle Climate Technologies at 866-676-1989.

DANGER

NOT FOR USE IN RESIDENTIAL LIVING AREAS OR IN 

ENCLOSED SPACES WITHOUT ADEQUATE VENTILATION. 

FOR OUTDOOR USE. INDOOR USE PERMITTED ONLY 

FOR:

 

THE TEMPORARY HEATING OF ADEQUATELY VENTILATED BUILDINGS 

OR STRUCTURES UNDER CONSTRUCTION, ALTERATION OR REPAIR. 

This is an 

unvented portable heater that uses air (Oxygen) from within the area in which it is used.  

Failure to provide adequate combustion and ventilation air will result in asphyxiation, carbon 

monoxide poisoning, bodily injury or death. Refer to “Ventilation” on Page 5.

FACTORY ID: 001

Safety Information

FIRE, BURN, INHALATION AND EXPLOSION HAZARD. 

Keep 

combustibles such as; building materials, paper or cardboard a 

safe distance away from the heater as recommended by these 

instructions. Never use the heater in spaces which contain products such as; gasoline, 

solvents, paint thinners, dust particles, volatile or airborne combustibles or any unknown 

chemicals. This is an unvented portable heater. It uses air (Oxygen) from the area in which 

it is used. Adequate combustion and ventilation air must be provided. Refer to “Ventilation” 

on page 5. Bulk fuel storage should be a minimum of 25 feet from heater.

WARNING

DO NOT OPERATE THIS HEATER UNTIL YOU HAVE READ 

AND THOROUGHLY UNDERSTAND THESE SAFETY AND 

OPERATING INSTRUCTIONS.

Failure to comply with the precautions and instructions provided with this heater can result 

in death, serious bodily injury, property loss or damage from the hazards of fire, soot pro-

duction, explosions, burns, asphyxiation or carbon monoxide poisoning. Only persons who 

can read and understand these instructions should use or service this heater

DANGER

WARNING

1 Industrial Blvd #101, Sauk Rapids, MN 56379 USA • Toll Free 

(866) 676-1989

Fax: 320-251-2922 • Web: 

www.remingtonheater.com

 • Email: [email protected]

© 2018 Pinnacle Climate Technologies, Inc.

RGSA-40

3

User’s Manual & 

Operating Instructions

Silent Drive

®

 FORCED AIR HEATER

U.S. Patent No. 9,644,863

Summary of Contents for Silent Drive REM-150T-SDR-O

























Reviews: