Videonics PowerScript PS4000S, Instruction Manual

Page: 134 / 236

Chapter 7 Advanced PowerScript Functions
124
• 0 IRE —Use this setting when you need to match PowerScript’s output to equipment
that puts out 0 IRE black. Some equipment, especially consumer-level, puts out a
lower black level at 0 IRE.
• 7.5 IRE —Use this setting to have PowerScript output blacks at the broadcast stan-
dard of 7.5 IRE.
Advanced Settings
If you ever have occasion to contact Videonics Technical Support for assistance, you
might be asked to access the
Advanced Settings .
WARNING!
Never make changes to the Advanced Setting unless specifically asked to do
so by Videonics Technical Support.
Studio Model Settings
To access this menu, click the Studio Model Settings button in the SETUP VIDEO menu
(described above).
Out Sync/Horizontal Phase —If you are using PowerScript’s sync function and your output
signals lose synchronization, enter a value in the Horizontal Phase text box to adjust the
timing and restore synchronization.
Out Key/Key Delay —This option is similar to the one above except that it can be used to
adjust the signal phase being output through PowerScript’s Key OUT connector.
SETUP: STUDIO
KEY DELAY
(0-63 pixels)
ON OFF
HORIZONTAL PHASE
OUT vs. SYNC (pixels)
COMPOSITE
& Y/C
COMPONENT
BETACAM MII
BETACAM MII
IN
COMPONENT
OUT LEVELS
COMPONENT
IN LEVELS
OUT
SYNC
OUT
KEY
COMB
FILTER
These options are
available only if you
have the PowerScript
Studio Component
model (PS-4000SC)
SETUP: STUDIO Menu