Videonics PowerScript PS4000S, Instruction Manual

Page: 58 / 236

Chapter 3 PowerScript Tutorial
48
To make a copy of the original project:
1 Display the PROJECT/PAGES menu (Ctrl+F12) and select the project you want to copy
(TUTORIAL) in the
Projects list.
2 Click the Copy button just below the Projects list. The COPY PROJECT menu appears.
(This menu is just like the one you see when creating a new project.)
3 Indicate which PC card (FRONT or BACK) you want to use to store the project; enter a
name for the project copy; optionally, enter a
Comment ; then click the Copy button.
PowerScript creates the copy and its name appears in the Projects list. Select the project name
in the list and note that it contains the same pages with the same names and numbers as the
originals.
Renumbering Pages
To renumber the pages in a project:
¨
Make sure the project whose pages you want to renumber is selected in the Projects list,
then click the Renumber All button.
PowerScript renumbers the pages 1, 2, and 3.
CHANGE PG. #
COMMENT COMMENT
PROJECT/ PAGE
PROJECTS PAGES
CUT COPY PASTE
NEW: ABOVE NEW: BELOW NEW: END
DELETE RENAME
COPY NEW
XYZZY
SAVE
AUTO-SAVE
1
2 RENUMBER -
ALL
DELETE
1. Opening
1.1 Title
1.2 Credits
SnS
A: AUTOAPS
A: AUTOEPS
A: DEMO
A: TUTORIAL
Opening
See “Renumbering Pages”below
1
Recall from an earlier lesson that you learned how to navigate to other pages in a
project by entering their numbers on the keypad and pressing the Enter key. In the
PROJECT/PAGES menu (above), the pages are currently numbered 1, 1.1, and 1.2.
Just to make navigation a little easier, you can renumber the pages so that they have
whole integers
.