V-ZUG 74A, Instructions Manual

Page: 20 / 218

20
UNDERWAY” is displayed.
The descale programme starts and the descaler liquid co-
mes out of the water spout.
The descale programme automatically performs a series of
rinses and pauses to remove limescale deposits from inside
the machine.
After about 30 minutes, the message “RINSING FILL TANK” is
displayed.
8. The appliance is now ready for rinsing through with clean
water. Remove the water tank, empty, rinse under running
water, fill with clean water and replace.
“RINSING PRESS OK” is displayed.
9. Empty the container used to collect the descaler solution
and replace it under the hot water spout.
10. Press the OK button (B4) to start rinsing.
Hot water flows out of the spout and the message “RINSING
PLEASE WAIT” is displayed.
11. When the water tank is completely empty, the message
“RINSING COMPLETE PRESS OK” is displayed.
12. Press the OK button (B4). The appliance goes off automati-
cally.
TURNING THE APPLIANCE OFF
Each time the appliance is turned off, it performs an automatic
rinse cycle which cannot be interrupted.
Danger of burns!
During rinsing, a little hot water
flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance off, press the ON/OFF/standby button
(A7).
The appliance performs a rinse cycle then goes off.
Please note: If the appliance is not used for an exten-
ded period, place the main switch on the back of the appliance
(A23) in the 0 position.
TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1.8 litres
Size: LxHxD: 594x 375/378/454x412 mm
Weight: 26 kg
The appliance complies with the following EC direc-
tives:
• Low Voltage Directive 2006/95/EC and subsequent
amendments;
• EMC Directive 2004/108/EC and subsequent amendments;
• EC Regulation 1275/2008 for standby
Materials and accessories coming into contact with food conform
to European regulation (EC) no. 1935/2004.