Care, cleaning and disinfection
74
4990113_030_01 — 2069106 — 2017–11–02
position, the sheet metal casing and the bellows of the column can
be pulled apart and are easy to clean. After cleaning, the column
should be lowered again (key
L
EVEL
POSITION
)
so that the shuttle can
be approached without collision.
Alcohol or aldehyde-based surface disinfectants may be used to
disinfect stainless steel components. Use only aldehyde-based
surface disinfectants for plastic parts and pads. Alcohol-based
solutions can damage these surfaces. Follow the manufacturer's
instructions when using a disinfectant!
After cleaning and disinfecting, remove any excess moisture, such
as drops at the bottom edge, using a dry cloth.
Remove the pad to clean the pad plate and the underside of the
pad. Attach the cleaned and disinfected pad to the product using
dry Velcro straps only.
15.2
External power supply unit
The power supply unit is located outside the operating room (e.g.
installed in the control cabinet). The power supply unit does not
have to be cleaned or disinfected. Do not allow the power supply
unit to come into contact with liquids.
15.3
Cleaning shuttle
With the cleaning shuttle, the floor plate of the mobile operating
table column is raised so that the underside of the floor plate can be
cleaned. Note the instructions for use of the cleaning shuttle. The
cleaning shuttle 2.01 with the material number 1536993 is
approved.
