Unpacking and setting up the operating table column
22
4990113_030_01 — 2069106 — 2017–11–02
2
Unpacking and setting up the operating table column
The operating table is a modular system that consists of the
following products:
• Operating table column
• Operating tabletop
• Section segments and accessories
• Shuttle
Fixed installation
operating table
column
Repairs to the fixed installation operating table column may only be
performed on-site by the Technical Customer Service at
TRUMPF Medizin Systeme GmbH + Co. KG or by personnel
authorized, trained, and certified by Trumpf Medical. The mounting
of the operating table column is described in the installation manual.
The operating tabletop is delivered separately on a shuttle.
Clean the operating table column before using it for the first time
(see chapter 15 on page 73).
mobile operating
table column
The delivery of the mobile operating table includes the operating
table column, a shuttle, an operating tabletop and the additional
equipment. It is delivered on a pallet, packed in a box. Ordered
section segments and accessories are individually packaged on the
pallet. Warning: the packaging is not weatherproof. Set the
ambient conditions for storage and transportation (shipping) in
chapter 16.1 on page 75.
Unpack the operating table in a room with a level floor and
sufficient open space to roll away the pallet. The ambient conditions
in the room must correspond to the operating conditions of the
operating table. See chapter 16.2 on page 75.
1. Set down the palette in such a manner that a surface of
approximately 1.5 m in width and 6 m in length is available.
2. Open the top of the box.
