Unpacking and setting up the operating table column
24
4990113_030_01 — 2069106 — 2017–11–02
18. On the shuttle, press the right pedal [42] down. The shuttle is
braked.
19. Dispose of the pallet, ramp, and packing material in an
environmentally responsible manner.
Set up the operating table at the location of use:
The floor at the location of use must be level, so that the operating
table column is secure and does not wobble. The required flatness
tolerance is 3mm to 1m measuring point distance (floor must have
a flatness according to DIN 18202, table 3, line 4).
20. Release the brake and set the required driving mode on the
shuttle. Note the operating instructions of the shuttle.
21. Drive the shuttle with the operating table to the intended
location of use.
22. Ensure that the operating table is not placed on cables or
objects.
Set down operating table: Press and hold the center pedal at
the shuttle until the transfer is complete.
The operating table is placed on the floor and the operating
table column moves into the upper transfer position until the
operating tabletop is no longer on the shuttle. A double beep
indicates the end of the transfer.
23. Drive the shuttle away.
24. Charge the mobile operating table column. See chapter 5.4
on page 45.
25. Cleaning the operating table column (see chapter 15 on
page 73).
