EMC notes
4990113_030_01 — 2069106 — 2017–11–02
85
21
EMC notes
The device must not be used directly next to other devices. If this is
required, the device must be continually monitored to ensure its
proper operation under these applied conditions.
The operating table may only be operated with the cables supplied
with the product. The use of cables other than those specified may
result in an increased transmission or reduced interference immunity
of the TruSystem 7500 operating table.
Table 1 according to IEC 60601-1-2:2007
Guidelines and manufacturer's declaration - electromagnetic interference
The TruSystem 7500 operating table is intended for use in electromagnetic environments as specified below. The customer or
user of the aforementioned device should ensure that it is operated in one of the environments as described.
Emitted interference measurements
Compliance
Electromagnetic environment - guidelines
HF emissions in accordance with CISPR 11 Group 1
The TruSystem 7500 operating table exclusively
uses HF energy for its internal FUNCTION.
Therefore, its HF emissions levels are very low, it is
improbable that neighboring devices would be
affected by interference.
HF emissions in accordance with CISPR 11 Class A
The TruSystem 7500 operating table is suitable for
use in non-domestic establishments and those
connected directly to the PUBLIC LOW-VOLTAGE
NETWORK that supplies buildings used for
domestic purposes.
Harmonic Emissions as per IEC 61000-3-2 Not applicable
Voltage fluctuation/flicker emissions in
accordance with IEC 61000-3-3
Not applicable
