Triton RL5000, Service Manual

Page: 137 / 173

120
RL5000 S
ERIES
XS
CALE AND
X2 A
UTOMATED
T
ELLER
M
ACHINES
S
ERVICE
M
ANUAL
Section 3
SDD E
RROR
C
ODES
Error Code Description Occurrence Explanation
00 Good Operation After successful
operation
No problems found
33 Feed Failure During Dispense Failure to pick a note
from the cassette
34 Mistracked note
at feed sensor
During Dispense Note arrived at Feed
sensor with a note still
at the double detect.
35 Mistracked note
at double detect
sensor
During Dispense Note arrived at the
Double Detect sensor
without being seen by
the Feed sensor, or note
is too close to the
previous note.
36 Mistracked note
at exit
During Dispense or
Purge
Note seen by Exit
sensor without being
seen by other sensors.
37* Too long at exit During Dispense Exit sensor blocked for
longer than allowed for
current notes.
38 / 134* Blocked Exit Start of Dispense Exit sensor covered.
(LED 3 ON)
42 Timing wheel During Dispense,
Purge or Diagnostics
Measured note trans-
port speed fault
44 Bad roller profi le During Dispense Too much noise on
double detect sensor.
45* Diverter error During Dispense,
Purge or Diagnostics
Diverter has failed to
reject a note.
46 Exit quantifi ed During Dispense The count at the exit
disagrees with the other
sensors.
47 / 132 Note missing at
Double Detect
During Dispense,
Purge or Diagnostics
The double detect has
failed to detect a note
which has already been
seen by the feed sen-
sor.
48 Reject rate
exceeded
During Dispense More than 8 reject
events have occurred
during the current
dispense, or the overall
reject rate exceeds 10%
Note: Error codes marked * may have notes left in the transport when reported. The
SDD will automatically purge the transport before commencing the next operation.