Triton RL5000, Service Manual

Page: 126 / 173

109
S
ECTION
3 - L
EVEL
II M
ODULE
R
EPLACEMENT
/ D
IAGNOSTIC
S
TATUS AND
T
ESTING
Section 3
R
EPLACING THE
S
ECURITY
M
ODULE
Tools:
1 - #2 Phillips Screwdriver
1 - 7/16 inch sock et wrench
On terminals that are not confi gured with a TDM dispenser, the security module
is separate component that is located in the lower security cabinet of the ATM.
The se cu ri ty module is non-fi eld re pair able device and must be re placed if it is
defective.
The TDM utilizes a local security feature that is an imbedded function of the
dispenser's mainboard (located on top of the dispenser).
R
EMOVING THE
S
ECURITY
M
ODULE
1. "Shutdown the Terminal" from Management Functions.
2. Unlock and open the control pan el.
3. Push the AC pow er ON/OFF switch to the OFF(0) position.
4. Unlock and open the cabinet door fascia to access the com bi na tion lock.
5. Open the security cabinet main door by en ter ing the cor rect com bi na tion and
releasing the lock mech a nism.
6. Remove the dispenser mechanism. (Refer to the procedures for R
EMOVING THE
SDD D
ISPENSER OR
NMD 50 D
ISPENSER
as necessary).
7. Refer to Figure 3-97. The se cu ri ty module is lo cat ed inside the lower security
cab i net enclosure, either on the rear wall, at the top right corner, or on the
right wall, at the top left corner.
Figure 3-98. Security Module (and bracket)
mounted on the rear wall, at the top right
corner of the Se cu ri ty Cab i net.
Security module
mounting bracket
Figure 3-97. The input (docking board) and
output (dispenser) serial cable connections
on the security module
15 pin Output
serial cable
25 pin Input
serial cable
Security Module