Managing System
System Tools Configurations
Configuration Guide
53
Step 6
boot autoinstall start
Start the Auto Install process and the switch will download the configuration file and the
backup image automatically.
Step 7
end
Return to privileged EXEC mode.
Step 8
copy running-config startup-config
Save the settings in the configuration file.
Note:
•
The switch will obtain a new IP address from the DHCP server during the process of Auto In-
stall. If you want to access to the switch, you should check the new IP address on the DHCP
server.
•
IF the Auto Install process is failed, the switch will restart the process every 10 minutes. You
can stop the process manually.
The following example shows how to configure the Auto Install function.
Switch#configure
Switch(config)#boot autoinstall persistent-mode
Switch(config)#boot autoinstall auto-save
Switch(config)#boot autoinstall auto-reboot
Switch(config)#boot autoinstall retry-count
2
Switch(config)#show boot autoinstall
Auto Insatll Mode.................................Stop
Auto Insatll Persistent Mode...........Enabled
Auto Save Mode...................................Enabled
Auto Reboot Mode..............................Enabled
Auto Insatll Retry Count....................2
Auto Insatll sate....................................Stopped
4.2.6 Rebooting the switch
Follow these steps to reboot the switch:
Step 1
enable
Enter privileged mode.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
