Configuration Guide 600
Configuring Network Security
802.1X Configuration
6.1.2 Configuring 802.1X Globally
Choose the menu
Network Security
> 802.1X > Global Config
to load the following page.
Figure 6-7
Global Config
Follow these steps to configure 802.1X global parameters:
1) In the
Global Config
section, enable 802.1X globally and click
Apply
.
Auth Method
Select the 802.1X authentication method.
PAP
: The 802.1X authentication system uses EAP packets to exchange
information between the switch and the client. The transmission of EAP (Extensible
Authentication Protocol) packets is terminated at the switch and the EAP packets
are converted to other protocol (such as RADIUS) packets, and transmitted to the
authentication server.
EAP
: The 802.1X authentication system uses EAP packets to exchange information
between the switch and the client. The EAP packets with authentication data are
encapsulated in the advanced protocol (such as RADIUS) packets, and transmitted
to the authentication server.
Handshake
Enable or disable the Handshake feature. The Handshake feature is used to detect
the connection status between the TP-Link 802.1X Client and the switch. Please
disable Handshake feature if you are using other client softwares instead of TP-
Link 802.1X Client.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
