Configuring SNMP & RMON
Notification Configurations
Configuration Guide
745
Step 3
end
Return to privileged EXEC mode.
Step 4
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the switch to send linkup traps:
Switch#configure
Switch(config)#snmp-server traps snmp
linkup
Switch(config)#end
Switch#copy running-config startup-config
Enabling the SNMP PoE Trap
Step 1
configure
Enter global configuration mode.
Step 2
snmp-server traps power
[
over-max-pwr-budget | port-pwr-change | port-pwr-deny | port-
pwr-over-30w | port-pwr-overload | port-short-circuit | thermal-shutdown
]
Configure parameters of PoE traps supported on the switch.
over-max-pwr-budget:
Enable PoE over max power budget trap. The trap can be triggered
when the total power required by all the connected PDs exceeds the maximum power the
PoE switch can supply.
port-pwr-change:
Enable PoE port power change trap . The trap can be triggered when a
PoE port starts to supply power or stops supplying power.
port-pwr-deny:
Enable PoE port power deny trap . When the total power required by all
the connected PDs exceeds the system power limit, the switch will power off PDs on low-
priority PoE ports to ensure stable running of the other PDs. The trap can be triggered when
the switch powers off PDs on low-priority PoE ports.
port-pwr-over-30w:
Enable PoE port power over 30 watts trap. The trap can be triggered
when the power required by the connected PD exceeds 30 watts.
port-pwr-overload:
Enable PoE port power overload trap. The trap can be triggered when
the power required by the connected PD exceeds the maximum power that the port can
supply.
port-short-circuit:
Enable PoE port short circuit trap. The trap can be triggered when a short
circuit is detected on a PoE port.
thermal-shutdown:
Enable PoE port short circuit trap. The trap can be triggered when a
short circuit is detected on a PoE port.
Step 3
end
Return to privileged EXEC mode.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
