Configuration Guide 585
Configuring Network Security
ARP Inspection Configurations
4
ARP Inspection Configurations
With ARP Inspection configurations, you can:
Configure ARP Detection
Configure ARP Defend
View ARP Statistics
4.1 Using the GUI
4.1.1 Configuring ARP Detection
The ARP Detection feature allows the switch to detect the ARP packets based on the
binding entries in the IP-MAC Binding Table and filter out the illegal ARP packets. Before
configuring ARP Detection, complete IP-MAC Binding configuration. For details, refer to
.
Choose the menu
Network Security > ARP Inspection > ARP Detect
to load the following
page.
Figure 4-1
ARP Detect
Follow these steps to configure ARP Detection:
1) In the
ARP Detect
section, enable the ARP Detection feature.
2) In the
Trusted Port
section, select one or more ports to be configured as the trusted
port(s), on which the ARP Detection function will be inactive. The specific ports, such as
up-link ports and routing ports are suggested to be set as trusted.
3) Click
Apply
.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
