Configuration Guide
452
Configuring QoS
DiffServ Configuration
Step 4
show qos status
Verify that DSCP priority is enabled.
show qos dscp-map
Verify the DSCP-TC mapping relations.
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to map DSCP values 10-14 to TC1, and keep other
mapping relations as default:
Switch#configure
Switch(config)#qos queue dscp-map
10-14 0
Switch(config)#show qos status
802.1p priority is disabled.
DSCP priority is enabled.
Switch(config)#show qos dscp-map
...
----------------------------------------------------------------------------------
DSCP 8 9 10 11 12 13 14 15
TC TC1 TC1 TC0 TC0 TC0 TC0 TC0 TC1
----------------------------------------------------------------------------------
...
Switch(config)#end
Switch#copy running-config startup-config
Configuring Port Priority
Select the desired port to set the priority. Packets from this ingress port are mapped to the
TC queue based on port priority.
Step 1
configure
Enter global configuration mode.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
