![TP-Link T2500G-10MPS User Manual Download Page 757](http://html1.mh-extra.com/html/tp-link/t2500g-10mps/t2500g-10mps_user-manual_1145700757.webp)
Configuring SNMP & RMON
SNMP Configurations
Configuration Guide
733
Choose the menu
SNMP > SNMP Config > SNMP Community
to load the following page.
Figure 2-5
SNMP Community
Set the community name, access rights and the related view. Click
Create
.
Community Name
Set the community name with 1 to 16 characters. For SNMPv1 and SNMPv2c, the
community name match is used for authentication.
Access
Specify the access right to the related view. The default is read-only.
read-only:
The NMS can view but not modify parameters of the specified view.
read-write:
The NMS can view and modify parameters of the specified view.
MIB View
Choose a view to allow it to be accessed by the community. The default is viewDefault.
2.2 Using the CLI
2.2.1 Enabling SNMP
Step 1
configure
Enter global configuration mode.
Step 2
snmp-server
Enabling SNMP.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...