Configuring QoS
DiffServ Configuration
Configuration Guide
453
Step 2
interface
{
fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
}
Enter interface configuration mode.
Step 3
qos
tc-id
Configure the TC queue of the port.
tc-id
:
Configure the TC queue. The valid values are from 0 to 7.
Step 4
show qos interface [fastEthernet
port-list
|
gigabitEthernet
port-list
] [port-channel
lagid-list
]
Verify the TC queue of the port. If no port is specified, it displays the TC queues of all ports.
port-list:
The list of Ethernet ports.
lagid-list:
The list of LAGs.
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
Note:
All the ports in the same LAG should be assigned with the same port priority.
The following example shows how to map port 5-7 to TC1, and keep other mapping
relations as default:
Switch#configure
Switch(config)#interface range gigabitEthernet
1/0/5-7
Switch(config-if-range)#qos
1
Switch(config-if-range)#show qos interface gigabitEthernet
1/0/5-7
Port TC Value LAG
---------- ------------- ------------
Gi1/0/5 TC 1 N/A
Gi1/0/6 TC 1 N/A
Gi1/0/7 TC 1 N/A
Switch(config-if-range)#end
Switch#copy running-config startup-config
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
