Configuration Guide 625
Configuring Network Security
AAA Configuration
Methodlist pri1 pri2 pri3 pri4
default local -- -- --
Login1 radius local -- --
Switch(config)#end
Switch#copy running-config startup-config
The following example shows how to create an Enable method list named Enable1, and
configure the method 1 as the default radius server group and the method 2 as local.
Switch#configure
Switch(config)##aaa authentication enable
Enable1 radius local
Switch(config)#show aaa authentication enable
Methodlist pri1 pri2 pri3 pri4
default local -- -- --
Enable1 radius local -- --
Switch(config)#end
Switch#copy running-config startup-config
8.2.5 Configuring the AAA Application List
You can configure authentication method lists on the following access applications:
Console, Telnet, SSH and HTTP.
Console
Follow these steps to apply the Login and Enable method lists for the application Console:
Step 1
configure
Enter global configuration mode.
Step 2
line console
linenum
Enter line configuration mode.
linenum
: Enter the number of users allowed to login through console port. Its value is 0 in
general, for the reason that console input is only active on one console port at a time.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
