Managing System
System Tools Configurations
Configuration Guide
47
After upgrading, the
device will reboot
automatically with
the backup image
Select this option to reboot automatically with the backup image after upgrading.
4.1.5 Configuring Auto Install Function
Note:
You should configure the DHCP server and the TFTP server first before configuring the Auto Install
function.
Choose the menu
System > System Tools > Auto Install
to load the following page.
Figure 4-5
Configuring the Auto Install Function
In the
Auto Install Configuration
section, specify the parameters and click
Apply
.
Auto Install
Mode
Select
Start
to enable the Auto Install function and the switch will download the
configuration file and the backup image automatically.
Auto Install
Persistent Mode
Specify the Auto Install Persistent Mode. If you select Enable and save configuration,
Auto Install will start during next reboot.
Auto Save Mode
Specify the Auto Save Mode. If you select Enable, the switch will save the
configuration file downloaded as startup configuration file automatically.
Auto Reboot
Mode
Specify the Auto Reboot Mode. If you select Enable, the switch will reboot
automatically after the auto install process is completed successfully.
Auto Install
Retry Count
Specify the Auto Install Retry Count. It ranges from 1 to 3.
Auto Install
State
Display the state of the auto install function.
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
