Configuration Guide
373
Configuring Layer 2 Multicast
Configuring MLD Snooping
3.1.4 Configuring the Multicast VLAN
In old multicast transmission mode, when users in different VLANs apply for data from
the same multicast group, the Layer 3 device will duplicate this multicast data and deliver
copies to the Layer 2 devices.
With Multicast VLAN configured, all multicast group members will be added to a VLAN.
Layer 3 device only need to send one piece of multicast data to a Layer 2 device, and the
Layer 2 device will send the data to all member ports of the VLAN. In this way, Multicast
VLAN saves bandwidth and reduces network load of Layer 3 devices.
Choose the menu
Multicast > MLD Snooping > Multicast VLAN
to load the following page.
Figure 3-4
Multicast VLAN Config
Creating Multicast VLAN and Configuring Basic Settings
In the Multicast VLAN section, follow these steps to enable Multicast VLAN and to finish the
basic settings:
1) Set up the VLAN that the router ports and the member ports are in. For details, please
refer to
Summary of Contents for T2500G-10MPS
Page 1: ...User Guide T2500G 10MPS 1910012405 REV1 0 1 April 2018...
Page 24: ...Using the CLI 767 Appendix Default Parameters 773...
Page 145: ...Part 5 Monitoring Traffic CHAPTERS 1 Traffic Monitor 2 Appendix Default Parameters...
Page 172: ...Part 7 Configuring DDM CHAPTERS 1 Overview 2 DDM Configuration 3 Appendix Default Parameters...
